Jump to content
Sign in to follow this  
Cpt_Puro

Low cpu frequency, lag

Recommended Posts

Since months, i can't play squad on my second compmuter, a notebook (MSI GT70 ONE).

when i join a server, my cpu fall at 35% max  and stay at 1.19 ghz the most of the time!

his normal speed is 2.4ghz and when i play others games (heavy recent game), his frequency is around 3.2 ghz.

My graphic card is a gtx 680m and is used at 55%... Of course i have same issue with postscriptum.

 

i try DIY Squad FixIt Tool and others things, nothing works... All other recent game work fine.

 

my config.

Processors Information
-------------------------------------------------------------------------

Socket 1            ID = 0
    Number of cores        4 (max 4)
    Number of threads    8 (max 8)
    Name            Intel Core i7 3630QM
    Codename        Ivy Bridge
    Specification        Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
    Package (platform ID)    Socket 988B rPGA (0x4)
    CPUID            6.A.9
    Extended CPUID        6.3A
    Core Stepping        E1/L1
    Technology        22 nm
    TDP Limit        45.0 Watts
    Tjmax            105.0 °C
    Core Speed        3192.4 MHz
    Multiplier x Bus Speed    32.0 x 99.8 MHz
    Base frequency (cores)    99.8 MHz
    Base frequency (ext.)    99.8 MHz
    Stock frequency        2400 MHz
    Instructions sets    MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX
    Microcode Revision    0x1F
    L1 Data cache        4 x 32 KBytes, 8-way set associative, 64-byte line size
    L1 Instruction cache    4 x 32 KBytes, 8-way set associative, 64-byte line size
    L2 cache        4 x 256 KBytes, 8-way set associative, 64-byte line size
    L3 cache        6 MBytes, 12-way set associative, 64-byte line size
    Max CPUID level        0000000Dh
    Max CPUID ext. level    80000008h
    Cache descriptor    Level 1, D, 32 KB, 2 thread(s)
    Cache descriptor    Level 1, I, 32 KB, 2 thread(s)
    Cache descriptor    Level 2, U, 256 KB, 2 thread(s)
    Cache descriptor    Level 3, U, 6 MB, 16 thread(s)
    FID/VID Control        yes


    IBRS            supported, disabled
    IBPB            supported
    STIBP            supported, disabled
    RDCL_NO            no
    IBRS_ALL        not supported
    Turbo Mode        supported, enabled
    Max non-turbo ratio    24x
    Max turbo ratio        34x
    Max efficiency ratio    12x
    Min Power        36 Watts
    O/C bins        none
    Ratio 1 core        34x
    Ratio 2 cores        33x
    Ratio 3 cores        32x
    Ratio 4 cores        32x
    TDP Level        45.0 W @ 24x

    Temperature 0        47 degC (116 degF) (Package)
    Temperature 1        46 degC (114 degF) (Core #0)
    Temperature 2        38 degC (100 degF) (Core #1)
    Temperature 3        45 degC (113 degF) (Core #2)
    Temperature 4        41 degC (105 degF) (Core #3)
    Voltage 0        1.13 Volts (VID)
    Power 00        8.72 W (Package)
    Power 01        5.95 W (IA Cores)
    Power 02        0.02 W (GT)
    Power 03        2.75 W (Uncore)
    Clock Speed 0        3192.38 MHz (Core #0)
    Clock Speed 1        3192.38 MHz (Core #1)
    Clock Speed 2        3192.38 MHz (Core #2)
    Clock Speed 3        3192.38 MHz (Core #3)
    Core 0 max ratio    34.0 (effective 34.0)
    Core 1 max ratio    34.0 (effective 34.0)
    Core 2 max ratio    34.0 (effective 33.0)
    Core 3 max ratio    34.0 (effective 34.0)

 

 

0 

BIOS
-------------------------------------------------------------------------

UEFI                Yes

Chipset
-------------------------------------------------------------------------

Northbridge            Intel Ivy Bridge rev. 09
Southbridge            Intel HM77 rev. 04
Graphic Interface        PCI-Express
PCI-E Link Width        x16
PCI-E Max Link Width        x16
Memory Type            DDR3
Memory Size            16 GBytes
Channels            Dual
Memory Frequency        798.1 MHz (1:6)
CAS# latency (CL)        11.0
RAS# to CAS# delay (tRCD)    11
RAS# Precharge (tRP)        11
Cycle Time (tRAS)        28
Command Rate (CR)        2T
Host Bridge            0x0154

 


Display Adapters
-------------------------------------------------------------------------

Display adapter 0    
    ID            0x1000000
    Name            NVIDIA GeForce GTX 680M
    Board Manufacturer    Micro-Star International Co., Ltd. (MSI)
    Revision        A2
    PCI device        bus 1 (0x1), device 0 (0x0), function 0 (0x0)
    Vendor ID        0x10DE (0x1462)
    Model ID        0x11A0 (0x10BC)
    Revision ID        0xA1
    Performance Level    0

Display adapter 1    
    ID            0x4000000
    Name            Intel(R) HD Graphics 4000
    Board Manufacturer    Micro-Star International Co., Ltd. (MSI)
    PCI device        bus 0 (0x0), device 2 (0x2), function 0 (0x0)
    Vendor ID        0x8086 (0x1462)
    Model ID        0x0166 (0x10BC)
    Revision ID        0x9
    Performance Level    0
        Core clock    350.0 MHz

Win32_VideoController        AdapterRAM = 0xFFF00000 (4293918720)
Win32_VideoController        AdapterRAM = 0x84000000 (2214592512)
Win32_VideoController        DriverVersion = 25.21.14.1694
Win32_VideoController        DriverVersion = 10.18.10.4358
Win32_VideoController        DriverDate = 11/12/2018
Win32_VideoController        DriverDate = 12/21/2015

Monitor 0    
    Model             ()
    ID            CMO1720
    Serial            
    Manufacturing Date    Week 2, Year 2011
    Size            17.1 inches
    Max Resolution        1920 x 1080 @ 60 Hz
    Horizontal Freq. Range    0-0 kHz
    Vertical Freq. Range    0-0 Hz
    Max Pixel Clock        0 MHz
    Gamma Factor        2.2


Software
-------------------------------------------------------------------------

Windows Version            Microsoft Windows 10 (10.0) Professional 64-bit   (Build 17134)
DirectX Version            12.0

 

 

 

Share this post


Link to post
Share on other sites

My first suggestion would be to go into your bios and temporarily disable CPU frequency changes (low power modes) so that your CPU doesn't drop below its base 2.4Ghz clock speed. 

 

Next would be check your windows power settings to make sure that it is in "high power" mode as well. 

Share this post


Link to post
Share on other sites

Thanks for your answer. But i already try all of these. Intel speedstep is disable and i use high performance setting for w10...  i only have these problem on squad and postscriptum....

Share this post


Link to post
Share on other sites

If speed step is disabled properly then how is your cpu frequency dropping down to 1.19ghz? It should always be running at  minimum at its base clock 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×