Forum Rules 07/06/2016
Prohibited topics include, but are not limited to: Piracy, drugs (including cannabis), pornography, religion, racism, sexism, homo/trans -phobic content, videos and images showing violent death or serious injury, ‘spam threads’, hacking & griefing (endorsement thereof), religion, politics, etc. Prohibition may be suspended for some threads if they are found to be suitable by the Moderation (such as scientific debate).
If there is doubt, the Moderation Team can decide whether a topic is considered illegal. §5 Attitude towards Squad and the Development Team
As per §1 and §2, keep in mind to be respectful and reasonable, not only towards all users of the forum, but also towards the Squad Team and towards any ideas and content and the game itself. Criticism is welcome, but if it is not constructive and/or if it is offensive, the Moderation may need to step in. Please refrain from posting if you are upset, angry or drunk, or you may be punished for things you wouldn’t have otherwise written, which is not in anyone's interest. §6 Language & Legibility
Please post only in English. Non-English content (including non-legible content) may be removed. If you see someone posting in another language because s/he apparently does not speak English, please report their post - if you can, you may reply in their language to explain their question, but please do translate their and your message so it can be reviewed by the Moderation. ‘Hiding’ insults in non-English posts will be punished harshly. Posts written largely in ‘leetspeak’ or full of spelling / grammatical errors may be treated like non-English content. This rule does not extend to PMs. §7 Forum structure & Search
Please ensure when posting a new thread, that the thread is located inside the correct forum section. Check all forum section titles to judge where your thread should belong. Threads created in the wrong forum section will be moved or deleted.
Before posting a new thread, please make use of the forum search to find older threads about the same topic. In doubt, it is recommended to rather post in an existing thread, unless that thread is years out of date. However, do not bump old threads without adding a new question / answer / insight that wasn’t in that thread before - use common sense. §8 Thread Titles
Please name your thread appropriately; the subject title should sum up / explain the content in the thread. If you fail to name your thread properly (such as ‘Hey!’ or ‘Check this out!’ or ‘Help!’), we will either rename or lock the topic. Repeated offense may lead to infractions. The practice of using CAPITALS only in your thread title is not allowed and will be edited or the thread will simply be deleted. Strange or abnormal Unicode characters should be excluded from thread titles for the sake of being distracting and unnecessary.
§9 Thread Capitalization
Please ensure that your post is not in all CAPITALS, as this is not allowed. Any threads posted in all caps will subsequently be removed from the forum. Repeated offenses may lead to infractions against your account. This practice is not approved or accepted here.
§10 Images in posts
When posting images, mind the following restrictions:
.gifs will be allowed and may be removed by Staff if deemed necessary.
Maximum size for images is 1280x1024.
Do not include more than ~1 large image per paragraph of text, unless in image collection / announcement threads. Link to further images.
Consider posting thumbnails. You may post a few more images per post if they are reasonably small, the details are for the Moderation to judge. §11 The use of BBCode
It is allowed to use the BBCode in your posts. Over usage is not allowed. You may use the Bold in a reasonable manner but not for the whole text body. You may use the size feature but in a limited reasonable manner. You may not use any of the additional fonts at all. Color may be used to high light a point but again, not for the whole text body. Moderators will be watching for misuse and will edit when required without giving notice. Continued disregard for this rule will result in Moderator action in the form of warnings. §12 Complaints of Server/Admin Abuse Reports of server/admin abuse will not be posted publicly. All reports concerning this type of behavior should be place in the appropriate sub-forum. http://forums.joinsquad.com/forum/241-report-server-admin-abuse/ All posts made outside of this area will be be removed. Section II: Reporting & Moderation §1 Reporting Posts
There is a Post Report system in place. If you notice a post that violates forum rules, simply use the exclamation mark icon below the users avatar image to send a report to the Moderation. We will then review this post. Your report will not be made public and cannot be linked to your person by anyone outside of the Squad Team. You will not be punished for using the Report system even if the report was false, unless you repeatedly abuse the system to spam it.
Do not ‘report’ posts by replying directly in public to them. In case of spambots, this prompts them to respond in turn, spamming the forum further. This also fuels flame wars and arguments. §2 Reporting Moderators
Moderators are subject to the same forum rules (and some additional rules / exceptions). If you think that a Moderator has treated you unfairly or is otherwise breaking forum rules, please PM the Lead Moderator or any Administrator. Do not accuse Moderators in public, the Squad Team will treat every complaint seriously and it is in our interest to discipline or remove Moderators who are known to break forum rules. §3 Respect Squad Team members and Moderators
Do not ignore or argue against Admin, Moderator or Dev instructions on the forum. If you have a complaint, as per §2, please inform the Team in private. You are expected to follow orders given by the Moderation, Administration and Development Team, and it is necessary for smooth running of the forum to respect their decisions. Being stubborn or ignoring warnings will lead to harsher punishments - however, we do not tolerate Moderator / Admin abuse of power / privileges, so do not hesitate to inform other Team members if you feel treated unfairly. §4 Bans and multiple accounts
If your account is temporarily or permanently banned, do NOT create another account. Bypassing a ban will result in further action, and a permanent ban of all of your accounts.
You are not allowed to have more than one account for any reason. If you share an internet connection with another user who has their own account, it might happen that this account is incorrectly identified as a secondary account - please get in touch with the Moderation or Administration to resolve such issues.
Search the Community
Showing results for tags 'tweak'.
Found 2 results
This is a small thing I noticed and I know this may almost sound nit-picky, but the FAL reload animation isn't accurate as to how a real FAL reload looks like. In-game, once the magazine is empty you hear the bolt lock back on the last round, followed by a tilt showing the bolt held back. The magazine is dropped and another loaded back in, but instead of hitting the bolt-release your guy charges the bolt back manually. As your guy pulls the charging handle you can immediately tell it sounds like the bolt is forward when it should be to the rear as well. A small change that simply uses the bolt-release feature on the FAL would be very appreciated. It should bring the reload time down slightly as well I think. Again, this is such a little thing that I didn't see any one mention it yet. So here it is
Hey all, this post is to AMD users, it's for CPUs primarily, but also GPUs. Obviously I cannot guarantee that these fixes will work for everybody, but hopefully somebody is able to squeeze out at least a few more frames. In this post, I will give an exhaustive list of all my relevant specs, settings, tweaks, and software information in an effort to help AMD users get as much more performance as possible. First off; it IS possible for AMD CPU's to perform well with Squad! My current setup gets 50-60 FPS consistently with up to around 45 players on all maps. Even with smoke and heavy combat, I usually don't dip down lower than the high 30's-low 40's. This is with 1080p, Max Effects, max AA, 125% resolution scale, and max Post Processing, I can play with more than 45 players, but obviously performance suffers, but not too badly! I still get a consistent 35-40 FPS even with 60+ players and combat, but the lower dips in frames are longer and more frequent. While this isn't amazing, it beats the heck out of many of the horror stories I have been hearing. Some people with similar or even slightly better specs are saying that even on low population servers with lowest settings, they are barely able to get 30-35 FPS without even being in combat.If it is possible for me, then in principle, it is for others too, let's begin: (Thank you to Boxknife for the format of these specs). System: CPU: FX-8320 @4.6Ghz (CPU ratio is 23.0) GPU: Sapphire R9-390 Nitro 1100Mhz on the core (+100), 1500Mhz on the memory (default) Afterburner power use percent: +50% (Latest non-beta drivers) MB: Asus M5A99FX Pro R2.0 Bios version: 2501 x64 (04/07/2014) RAM: 8GB DDR3 Corsair Vengeance @ 2133Mhz Timings: 11-11-11-28 (Voltage is auto) HDD: 1TB WD Black 7200 rpm Monitor: 1080p 60Hz Dell generic monitor. OS: Windows 7 Ultimate 64 Bit with all current updates. (There are two hotfixes that Microsoft has put out for the FX series of chips that can help with some performance issues, I have applied both and I would recommend you do too.) These are free for anybody, but you have to request Microsoft send them to you manually via email, however the action is automated and takes a few seconds at most, no signup or weirdness required. If you feel fishy about that, I will link to a Tek Syndicate forum post that has both files linked for download automatically. I think they are safe, but obviously, download at your own risk. Hotfix #2 Hotfix #1 Tek Syndicate Forum Post Power Supply: XFX Bronze 850 Watt. In Game Settings: Resolution: 1080p Fullscreen Vsync: On Res Scale: 125% AA: FXAA High View Distance: Epic Shadows: Low Shadow Quality: Off Shadow Res: 512 AO: Off AO Levels: None AO Scale: 1.0 Post Processing: Epic Eye Adapt: On Motion Blur: Off Lens Flair: Off Textures VRAM: 4GB+ Effects: Epic FOV: 100 Radeon Control Center Settings: Version:16.3 VSR: On GPU Scaling: Off Scaling Mode: Center Squad Radeon Control Center Game Profile Settings: Anti-Aliasing Mode: Override application settings. Anti-aliasing Level: 8xEQ Anti-Aliasing Filter: Standard. Anti-Aliasing Method: Multisampling. Morphological Filtering: Off. Antisotropic Filtering Mode: Override application settings. Antisotropic Filtering Level: 16x Texture Filtering Quality: High. Surface Format Optimization: On. Wait for Vertical Refresh: Always on. OpenGL Triple Buffering: On. Shader Cache: AMD optimized. Tessellation Mode: AMD optimized. Frame Rate target Control: Disabled. Bios Settings: (Note, Some of these settings may be different or not available depending on your mobo/hardware configuration.) CPU Basic Power Settings: Manual for the core voltage. Voltage: 1.440v (offset mode + 0.106250. All other voltages are auto.) Cool 'n' Quiet: Always Disabled C1E: Disabled SVM: Disabled Core C6 State: Disabled HPC Mode: Enabled Apm Master Mode: Disabled South Bridge Settings: HPEI: Enabled North Bridge Settings: IOMMU: Disabled Initiate Graphic Adapter: PEG/PCI Core On/Off: CPU Core Activation: 5th Core - 8th Core Disabled Ram Other Timings: Everything else for my DRAM timings is auto. (PM me for specifics if needed.) DRAM Driving Control: Left everything on auto for my Mobo and RAM setup as well. (PM me for specifics if needed.) DIGI+ Power Control: Manual CPU Load Line Calibration: Extreme CPU/NB Load Line Calibration: Extreme CPU Current Capability: 130% CPU/NB Current Capability: 130% CPU Power Phase Control: Extreme CPU Voltage Frequency: Auto CPU Power Duty Control: Extreme CPU Power Response Control: Ultra Fast CPU/NB Power Response Control: Ultra Fast CPU Power Thermal Control: 130 DRAM Current Capability: 110% DRAM Voltage Frequency: 300 DRAM Power Phase Control: Optimized HT Link Speed: 2600Mhz CPU/NB Speed: 2600Mhz PCIE Frequency: 110 (Default was 100) CPU Bus Frequency: 200 CPU Ratio: 23.0 I also have applied some basic ini tweaks, I will link to the main post on Reddit to these various possible tweaks. Reddit Performance Post Sticky Here are the specifics of the ini tweaks that I have applied: Squad Forum Post for Performance Tweaks FX.MaxCPUParticlesPerEmitter=20 FX.MaxGPUParticlesSpawnedPerFrame=0 ShowFlag.Decals=0 r.LightShafts=0 MaxChannels=96 (Default 128) r.CustomDepth=0 [[email protected]] r.SkeletalMeshLODBias=3 [[email protected]] r.Upscale.Quality=0 [[email protected]] r.TranslucencyLightingVolumeDim=16 r.SceneColorFormat=1 You will find the proper ini files to edit and all the exact details in the Squad forum post above, but for the sake of brevity; (I just used all the defaults that they had.) Well that was a bunch to type, hopefully not too many people got bored, but more importantly, hopefully this helps some of you fellow AMD users out there to get respectable, or even just playable performance out of your CPU's and GPU's! A big thanks to the readers/posters, and to the dev team for always keeping us in the loop and working on making our experience better every time! PS: I probably made a mistake or two somewhere here. If you find any obvious errors, feel free to message me. I will be going over this post with a fine toothed comb again within an hour or so, possibly making some edits. I may also add some other details. New Content: Special thanks to user, "A Pacifist" for posting this new thread. He posted some new audio tweaks that may help some more AMD users that are having frame issues. Check it out! New Stutter Fix For AMD Users Peace out everybody, ~Shadow